Monster Cable QL GFP-H QuickLock Gold Flex Pin Connectors (2 Pair)
from: Monster Cable
List Price: $19.99
Prices subject to change.
Price: $15.95
You Save: $4.04 (20%)Prices subject to change.
Availability: Usually ships in 24 hours
Product Description:
Speaker wire is made from copper wire that can corrode very quickly, rapidly deteriorating the performance of your cables and the overall performance of your system. To avoid this, always terminate your speaker wire with connectors. The kind of connector you need varies with the kinds of connectors on the back of your amp/receiver and your speakers. Often, Gold Flex Pin Connectors will be the way to go, and that's where QL GFP-H Connectors enter the picture.Best for use with speaker cables featuring advanced Monster QuickLock connector systemTwo pair (4 connectors) per package
Speaker wire is made from copper wire that can corrode very quickly, rapidly deteriorating the performance of your cables and the overall performance of your system. To avoid this, always terminate your speaker wire with connectors. The kind of connector you need varies with the kinds of connectors on the back of your amp/receiver and your speakers. Often, Gold Flex Pin Connectors will be the way to go, and that's where QL GFP-H Connectors enter the picture.Best for use with speaker cables featuring advanced Monster QuickLock connector systemTwo pair (4 connectors) per package
Features:
- Two piece screw-on design for easy and reliable crimpless and self crimping termination.
- 24k gold plated contacts for maximum signal transfer and corrosion resistance.
- Wider base minimizes shorting for maximum signal transfer.
- Special teeth and ring-lock for strong grip that stays tight for optimum signal transfer.
- High purity copper braid for greatest flexibility for hard-to-reach binding posts or push pin terminals.
Accessories:
- Monster Ultra Series 800 HDMI Video Cable (4ft)
- Monster Cable TGHZ-4RF 2 Gigahertz 4-Way Low-Loss RF Splitters for TV & Satellite
- Monster M Series Lock Master Pin Modular Speaker Cable Termination Post Base (2 pair)
- Monster M Series Lock Angled Spades Modular Speaker Cable Termination (2 pr. Medium)
- Monster M Series Lock Angled Spades Modular Speaker Cable Termination (2 pr. Large)
Related Items:
Browse for similar items by category:
- Electronics » Categories » Accessories & Supplies » Audio & Video Accessories » Cables & Interconnects » Audio Cables » Speaker Cables
- Electronics » Categories » Accessories & Supplies » Audio & Video Accessories » Cables & Interconnects » Connectors & Adapters
- Electronics » Categories » Accessories & Supplies » Audio & Video Accessories » Connectors & Inputs » Binding Posts
- Electronics » Electronics Features » Specialty Stores » Custom Stores » Custom Brands » Monster Cable » Home Audio & Video » Audio Cables » Speaker Cables » Standard
- Electronics » Refinements » Browse Refinements » Speaker Height (size_browse-bin) » 12 Inches & Under
Customer Reviews
Average Rating:
Rating: - High quality connectors when rolling your own is necessary
I'm fairly technically savvy, and a moderate audiophile. However, I wasn't looking for world class sound, merely competent sound for day-to-day use. With that use case in mind, I highly recommend this product. It is innovative in maintaining the flexibility of the connector for older or less precise speakers and terminals, and the overall design is sound.
However, there are a few caveats. My primary gripe is that the wire binding system, while effective, isn't great. The connector's ... Read More
Rating: 
- Flexible Pin type Connectors may not be the best choice
The seller (savewithsteve) is great, got everything on time and as desribed. This feedback is nothing to do with the seller or his service.
I think there is a inherent flaw in this product. Although it depends on what you use it for, I would recommend going for Dayton BACT-GRB Banana Plug Pair (Compression Type). If you are thinking of using these in the wall plates which have pin type inlets, let me warn you - They are thicker and CANNOT be used. If I have to just use them in speaker ... Read More
Rating: 
- Superb connectors for "guillotine" style connectors
Even high-end Bose speakers can sometimes utilize "guillotine" connectors through which you have to feed a twisted end of braided speaker cable. Unless you're a whiz at this, you often can bend wire strands trying to feed them in.
These connectors are a SUPERB solution. The wire (whether thin gauge "zip wire" or thick Monster Cable wire) is splayed out in this connector and locked in securely via a screw in fastener. The flex tip then feeds into the speaker's guillotine connector with ... Read More
Rating: - High tech connectors for old tech speakers
I used these for some old but excellent speakers without modern plug-in binding posts. They worked perfectly, and give me more peace of mind that I have a good connection to the speaker than just sticking the raw wire ends into the clips. I prefer using dedicated banana clips, but when that isn't possible these really do the job, and do it elegantly. I've used other screw in speaker connectors, but this system is much more secure, easier to use, and solid than the cheaper wire crimp style of attachment.
Rating: - Great connectors... if they are not too close to each other.
I bought these to make it easier to connect 12 pairs of speaker cable to a 12 channel amp.The connections on the amp are temination board type (tiny screws and tiny holes on a connector board).The connections are very close together. The Flex pin does indeed make the connection much easier than trying to insert bare wire into tiny holes to screw down. But when attached, the Flex pin connectors are fatter than bare speaker wire, so when they lay next to each other, they are firmly touching. ... Read More
- High quality connectors when rolling your own is necessaryI'm fairly technically savvy, and a moderate audiophile. However, I wasn't looking for world class sound, merely competent sound for day-to-day use. With that use case in mind, I highly recommend this product. It is innovative in maintaining the flexibility of the connector for older or less precise speakers and terminals, and the overall design is sound.
However, there are a few caveats. My primary gripe is that the wire binding system, while effective, isn't great. The connector's ... Read More
- Flexible Pin type Connectors may not be the best choiceThe seller (savewithsteve) is great, got everything on time and as desribed. This feedback is nothing to do with the seller or his service.
I think there is a inherent flaw in this product. Although it depends on what you use it for, I would recommend going for Dayton BACT-GRB Banana Plug Pair (Compression Type). If you are thinking of using these in the wall plates which have pin type inlets, let me warn you - They are thicker and CANNOT be used. If I have to just use them in speaker ... Read More
- Superb connectors for "guillotine" style connectorsEven high-end Bose speakers can sometimes utilize "guillotine" connectors through which you have to feed a twisted end of braided speaker cable. Unless you're a whiz at this, you often can bend wire strands trying to feed them in.
These connectors are a SUPERB solution. The wire (whether thin gauge "zip wire" or thick Monster Cable wire) is splayed out in this connector and locked in securely via a screw in fastener. The flex tip then feeds into the speaker's guillotine connector with ... Read More
- High tech connectors for old tech speakersI used these for some old but excellent speakers without modern plug-in binding posts. They worked perfectly, and give me more peace of mind that I have a good connection to the speaker than just sticking the raw wire ends into the clips. I prefer using dedicated banana clips, but when that isn't possible these really do the job, and do it elegantly. I've used other screw in speaker connectors, but this system is much more secure, easier to use, and solid than the cheaper wire crimp style of attachment.
- Great connectors... if they are not too close to each other.I bought these to make it easier to connect 12 pairs of speaker cable to a 12 channel amp.The connections on the amp are temination board type (tiny screws and tiny holes on a connector board).The connections are very close together. The Flex pin does indeed make the connection much easier than trying to insert bare wire into tiny holes to screw down. But when attached, the Flex pin connectors are fatter than bare speaker wire, so when they lay next to each other, they are firmly touching. ... Read More
