Bench Dog 40-028 PWR400 Power-Loc Auxiliary Router Table Lighted Power Switch
from: Bench Dog
Price: $49.00
Prices subject to change.Availability: Usually ships in 1-2 business days
Product Description:
Power-Loc (40-028) is a remote power switch that can be mounted almost anywhere. Tough, durable, it includes a lighted switch with a safety lock to prevent accidental tripping. 15 amp, 120 volt, 8' cord. Nonmagnetic switch. Power-Locs mounting bracket and multiple t-slots enable you to place it al
Amazon.com Product Description:
The Bench Dog Power-Loc is an auxiliary power switch that can be mounted almost anywhere. Its aluminum housing has six T-slots, and comes with an angle bracket for universal mounting. The lighted switch warns you when the power is on, which is crucial when you're using routers and other power tools that already come with their own power switch. The Power-Loc also comes with a safety lock to help prevent accidental tripping. It boasts 15 amp, 120-volt operation and has an 8-foot cord. Nonmagnetic, this switch mounts almost anywhere. It includes switch assembly, 4-1/4-20 jam nuts, 4-1/4-inch lock washers, 2-1/4-20 by 1/2-inch button head cap screws, 2-1/4-20 by 5/8-inch button head cap screws, and a 1-1/8-inch hex wrench.
Power-Loc (40-028) is a remote power switch that can be mounted almost anywhere. Tough, durable, it includes a lighted switch with a safety lock to prevent accidental tripping. 15 amp, 120 volt, 8' cord. Nonmagnetic switch. Power-Locs mounting bracket and multiple t-slots enable you to place it al
Amazon.com Product Description:
The Bench Dog Power-Loc is an auxiliary power switch that can be mounted almost anywhere. Its aluminum housing has six T-slots, and comes with an angle bracket for universal mounting. The lighted switch warns you when the power is on, which is crucial when you're using routers and other power tools that already come with their own power switch. The Power-Loc also comes with a safety lock to help prevent accidental tripping. It boasts 15 amp, 120-volt operation and has an 8-foot cord. Nonmagnetic, this switch mounts almost anywhere. It includes switch assembly, 4-1/4-20 jam nuts, 4-1/4-inch lock washers, 2-1/4-20 by 1/2-inch button head cap screws, 2-1/4-20 by 5/8-inch button head cap screws, and a 1-1/8-inch hex wrench.
Features:
- Auxiliary power switch that can be mounted almost anywhere
- Lighted switch warns you when the power is on; safety lock to help prevent accidental tripping
- Aluminum housing has 6 T-slots
- 15 amp; 120 volt; nonmagnetic; includes mounting bracket and hardware
- Weighs 1.8 pounds shipped; 1-year warranty
Accessories:
Related Items:
Browse for similar items by category:
- Tools & Home Improvement » Brands » Bench Dog
- Tools & Home Improvement » Categories » Power & Hand Tools » Power Tool Accessories » Router Accessories » Router Accessories & Parts
- Tools & Home Improvement » Specialty Stores » Promotions » Eligible for Super Saver Shipping
- Tools & Home Improvement » Specialty Stores » Custom Stores » Woodworking Shop » All Woodworking
- Tools & Home Improvement » Refinements » Browse Refinements » Table Saw Features (feature_browse-bin) » Bench
Customer Reviews
Average Rating:
Rating: 
- Works just like it's supposed to
I ordered this switch for my new router table. While waiting for it to arrive, I found a Rousseau switch on sale at my local Woodcraft, so I got it. I found the Rousseau easier to mount on my specific router table, so I got the idea of mounting this Bench Dog switch near the right side of my table saw. I plug my dust collector into it, and I can flip the dust machine on, then the saw, do my cut and reverse the process shutting down. Turns things on, turns them off. The bracket is a little confusing ... Read More
Rating: - bench dog 40-028 power-loc switch
Little need be said about this except that it does what it is intended to do - it makes it far more convenient to turn an under-table mounted router on and off.
These are designed to be be mounted every way but inside out.However, I inset mine into one of the router table legs, to get it fully out of the way, while leaving it accessible from the working area of the table.
The only real drawback to these is the price, in light of that the job could be done with a standard ... Read More
Rating: 
- Expensive for Adequate
The switch is good quality but that is to be expected for the price.The electrical cord could be a couple/three feet longer.The mounting scheme seems to be an engineering afterthought.I expected better -- seeing as it's a BenchDog switch for a BenchDog router table -- and would not make this purchase again.After purchasing this switch, I found another for $13 that I'm sure would have served just fine...a far cry from this 40-something dollar mistake.
Rating: - Just what you would expect from Bench Dog.
All of Bench Dog products are built the same - high quality.This is no exception, although expensive, sometimes I don't mind paying a little extra when you get quality.Plus much or all of Bench Dog items are Made in the USA!!
Rating: - Sweet Switch
I've been working on what I wanted in a router table for awhile and decided to built my own router table into the right extension of my tablesaw which I built to my specifications.
I wanted to use a switch and a miter slot and when I stumbled upon a BenchDog aluminum extrusion for the outer edge this was the perfect switch for it.
Although I struggled with the price and thought about other options I went with this.
You can bolt it to that piece of aluminum and you can move itslide ... Read More
- Works just like it's supposed toI ordered this switch for my new router table. While waiting for it to arrive, I found a Rousseau switch on sale at my local Woodcraft, so I got it. I found the Rousseau easier to mount on my specific router table, so I got the idea of mounting this Bench Dog switch near the right side of my table saw. I plug my dust collector into it, and I can flip the dust machine on, then the saw, do my cut and reverse the process shutting down. Turns things on, turns them off. The bracket is a little confusing ... Read More
- bench dog 40-028 power-loc switchLittle need be said about this except that it does what it is intended to do - it makes it far more convenient to turn an under-table mounted router on and off.
These are designed to be be mounted every way but inside out.However, I inset mine into one of the router table legs, to get it fully out of the way, while leaving it accessible from the working area of the table.
The only real drawback to these is the price, in light of that the job could be done with a standard ... Read More
- Expensive for AdequateThe switch is good quality but that is to be expected for the price.The electrical cord could be a couple/three feet longer.The mounting scheme seems to be an engineering afterthought.I expected better -- seeing as it's a BenchDog switch for a BenchDog router table -- and would not make this purchase again.After purchasing this switch, I found another for $13 that I'm sure would have served just fine...a far cry from this 40-something dollar mistake.
- Just what you would expect from Bench Dog.All of Bench Dog products are built the same - high quality.This is no exception, although expensive, sometimes I don't mind paying a little extra when you get quality.Plus much or all of Bench Dog items are Made in the USA!!
- Sweet SwitchI've been working on what I wanted in a router table for awhile and decided to built my own router table into the right extension of my tablesaw which I built to my specifications.
I wanted to use a switch and a miter slot and when I stumbled upon a BenchDog aluminum extrusion for the outer edge this was the perfect switch for it.
Although I struggled with the price and thought about other options I went with this.
You can bolt it to that piece of aluminum and you can move itslide ... Read More
